Home » Products » Industrial Paints » PROWOOD COMPLETE WOOD PROTECTION COATING
 
Click image to zoom
 
 
PRODUCT DESCRIPTION
Indian Paint's PROWOOD COMPLETE WOOD PROTECTION COATING is a modified wood finish.
 
PERFORMANCE FEATURES & BENEFITS
Indian Paint's PROWOOD COMPLETE WOOD PROTECTION COATING is a brushable clear wood finish. It enhance the natural look of wood & offers good resistance to normal wear & tear.
 
RECOMMENDED USAGE
Select seasoned wood for coating. Sand the wooden surface along the grains using emery paper 180. This should be followed by smooth sanding with emery paper 320 or 400. Wipe the surface to clean off loose dust particles.
 
RECOMMENDED APPLICATION
 
PRODUCT NAME COAT THINNER DILUTION%
(BY VOLUME)
APPLICATION
VISCOSITY(SEC.)
RE-COATING
PERIOD (HRS.)
INDIAN PAINT'S
PROWOOD
COATING
FIRST COAT
BRUSH/ ROLLER
MINERAL
TURPENTINE OIL
D - 5 BRUSH
20 - 25 SPRAY
30 - 50 BRUSH
20 - 25 SPRAY
24 HRS.
SAND LIGHTLY WITH
EMERY PAPER 320
WIPE CLEAN
         
INDIAN PAINT'S
PROWOOD
COATING
SECOND COAT
BRUSH/ ROLLER
MINERAL
TURPENTINE OIL
D - 5 BRUSH
20 - 25 SPRAY
30 - 50 BRUSH
20 - 25 SPRAY
24 HRS.
 
TECHNICAL DATA
Coverage : On smooth wooden surface by brushing 90 - 110 Sq.Ft. / Ltr / Coat
Drying time : Surface dry 15 - 20 Minutes
Gloss level / Sheen levels : 80% minimum Glossy and 15-25 % matt on coated wooden panel
at 60 degree gloss head
Flash point : Above 30°C (86°F)
Stability of thinned paint : Use within 24 hrs.
Shelf-life : 3 year from date of manufacture in original tightly closed containers
away from direct sunlight and excessive heat
 
RECOMMENDED PRECAUTIONS
Kindly refer to the Safety data sheet for Indian Paint's PROWOOD which gives detailed information on safety measures while handling the paint. Store in the product at ambient conditions in well ventilated location and away from the source of ignition and fire. Avoid eye and skin contact. In case of eye and skin contact wash with plenty of clean water. Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention if symptoms persist in both the cases. Use protective equipments like rubber/polythene gloves safety goggles/glasses face mask while handing the paint this is required for all paints. For optimum performance Indian Paint's PROWOOD interior must be applied at temperature between 200C to 400C and humidity not above 75%. Tinted paints need thorough shaking / mixing immediately after tinter addition as well as before use. Dispose in land filling. Do not dispose in any drain or water channel. Stir well and strain before use.
 
POST APPLICATION INSTRUCTIONS
For removing stain on tiles and metals surface apply NC thinner on the surface & wipe clean. If stain s are difficult to remove scraping can be done after applying NC thinner on the stained area. Precautions need to be taken while brushing / spraying like masking of adjourning areas with suitable material as the stain may be difficult to remove if present on wood or coated wooden and wall surfaces.
 
AVAILABLE PACKAGING
Metal Tins - 4 Liters, 1 Liter, 500 ML
 
FOR ADDITIONAL INFORMATION ON THIS PRODUCT
Indian Paints Industries
Call + 92 2162 24 43 10 or Mail to admin@indianpaints.in
www.indianpaints.in